Packard Bell Discovery M/Board

discovery board diagram

Specification

Audio: SigmaTel technologies SigmaTel STAC9756T audio codec
Bios: AMI
Chipset: Intel 845
CPU Support :
- Socket mPGA 478B
- Supports Intel P4 FC-PGA2 (Flip-chip Pin Grid Array), 800 MHz to 2.4 GHz.
- Warning: Not all the above processors have been qualified.
- 100 MHz (x4 = 400 MHz) data bus support (Quad-Bumped technology).
Form Factor : Flex-ATX 22.9 x 19.2 cm Form Factor
I/O Controller : Winbond W83627HF-AW
RAM :
- Supports 2 memory slots.
- Serial Presence Detect (SPD) support.
- Supports a maximum memory size of 1 GB (using 2 x 512 MB memory modules)
- Warning: Not all memory configuration qualified.
- Support only 3.3 V DIMM DRAM configurations.
- ECC DIMM support.
- 133 MHz SDRAM interface.
- STR power management support via self refresh mode using CKE.

Jumper	Configuration
JBAT1 - Clear CMOS jumper	1-2: Normal operation (default) 2-3: Clear current BIOS default settings
JP3 - Safe Mode/Recovery/Normal selection	1-2: Normal (default) 2-3: Safe Mode (restores safe values / loads BIOS setup in maint. mode) Open: Recovery (used only to flash a corrupted BIOS)