Packard Bell Bora Pro M/Board

MSI Bora Pro Motherboard Diagram

Specification

Audio : Creative 1373.
BIOS : AMI BIOS.
Cache : Integrated in CPU.
Chipset : Intel 82440ZX PCI set (82443ZX PCI/AGP controller (PAC) and 82371EB PCI/ISA IDE Xcelerator (PIIX4)).
CPU Support : Slot 1: Intel Pentium II, Pentium III or Celeron.
Expansion Slots : 2 PCI slots and 1 shared ISA/PCI slot.
Form Factor : MicroATX
RAM : 2 DIMM sockets supporting single- or double-sided SDRAM up to a maximum of 256 MB.
Video : 3DFX Voodoo 3, 8 MB SGRAM.

CPU : CPU upgradeable to Intel Pentium II 333/66 MHz or 600/100 MHz, Pentium III up to 500 MHz, Celeron up to 466 MHz.
RAM : Upgradable up to 512 MB using 66 or 100 MHz SDRAM DIMMs. The Bora Pro motherboard only accepts 168-pin DIMM modules. Only gold-plated DIMMs may be used, as the sockets on the motherboard are also gold-plated, and oxidation must be prevented. Use 3.3 V CAS Latency 2 or 3, single- or double-sided DIMMs only. Parity is not supported.

Jumper	Configuration
BAT1 - Clear CMOS	1-2 : Normal operation (default) 2-3 : Clear CMOS settings (keep system unplugged for five seconds)
JP14 - Clear BIOS Password	ON : Keep password (default) OFF : Password is cleared
JUSB - Front USB	1-4, 2-5 : Front USB enabled (upper back USB 'C' disabled) 2-5, 3-6 : Upper Back USB 'C' enabled (front USB disabled)

Multiplier	1	2	3	4
x3.5	ON	OFF	OFF	ON
x4	ON	OFF	ON	OFF
x4.5	ON	ON	OFF	OFF
x5	ON	ON	OFF	OFF
x5.5	ON	OFF	OFF	OFF
x6	OFF	ON	ON	ON
x6.5	OFF	OFF	ON	ON