Packard Bell 1000 M/Board

Specification

Battery : 3.5 Lithium
BIOS : 2 x 32KB, Packard Bell 3.80NP setup. SETUP.COM program on disk
Cache : N/A
Clock/Driver : (RTC)
Cover Removal : 5 Screws at back panel
CPU : 80286-12 MHz, 80286-16 MHz, 80286-20 MHz Hardware Switchable: Turbo button toggles LED SPEED Green 12/16/20 MHz Amber.
Drive Cavities : 3 X 5 1/4" half-height (exposed), 1 X 5 1/4" half-height (enclosed), 1 X 3 1/2" vertical (exposed)
I/O Expansion slots : 4 X 16-bit ISA, 2 X 8-bit ISA
Interfaces :
- 1 DB-25 Parallel Port
- 2 x RS232 DB-9 Serial Ports
- 1 PS/2 Keyboard Port
- 1 PS/2 Mouse Port
- 1 15-pin VGA Port
- 2 15-pin Game Port
Power Supply : 200 watts
RAM : Standard on motherboard : 2MB, Maximum on motherboard : 8MB (use 256Kb, 1MB 9-bit SIMMs, 100ns)
Speaker : Cone on front chassis
Video : Video adapter on expansion slot

Switch	Function	Pins	Description
S1	Monitor Type	ON OFF	* Colour Monochrome
S2	BIOS Size	ON OFF	* 256K EPROM 128K EPROM
S3	Speed Select	ON OFF	* 10 Mhz 5 or 8 Mhz
S4	Speed Select	ON OFF	* 8 or 10 Mhz 5 Mhz
S5	Floppy Address	ON OFF	* Primary 3Fh Secondary 37h
S6	Reserved	OFF
S7	Reserved	ON
S8	Reserved	ON

Cache Memory : This system does not support cache memory.
Maths Co-Processor : An 80287-10 co-processor can be installed in socket U48, no jumpers need to be changed.
RAM : Standard on motherboard : 2MB, Maximum on motherboard : 8MB (use 256Kb, 1MB 9-bit SIMMs, 100ns)
Video Memory : This system has a video card, upgrade depends on card installed.